4 Helpful Tips for Window Screen Repairs


Window screens aren’t meant to last forever. Especially if you have pets or kids, you know that rips and punctures to screens can happen! Luckily, window screen repairs are relatively easy and inexpensive to complete. Below, we’ve put together a few helpful tips if you decide to take on screen repairs yourself.

window screen repairs

1. Be Sure You Have the Right Tools

No window repair job can be successfully completed without the right tools and materials! If you’re going to give it a shot on your own, you’ll need the following items:

  • Window screening
  • Spline or plastic cording
  • Spline tool
  • Clamps
  • Flathead screwdriver
  • Scissors
  • Utility knife

2. Choose the Correct Replacement Window Screen Material

There are a variety of window screen materials available to choose from, which can make doing it yourself a little confusing. How do you know which material to pick?

The most durable (and most popular) type of screening is fiberglass. It’s flexible and easy to use – the best part is that if you slip up, you can simply take it out of the frame and try again. You can also purchase solar fiberglass to cut down on UV rays; this option is more expensive but a great choice if you’re hoping to protect your furniture or carpet from sun damage.

Aluminum screens offer incredible visibility and are sturdy, but are more easily damaged than fiberglass. You only get one chance after you’ve made grooves with the spline tool, so be extra careful if you go this route!

3. Consider Size of the Repair

Replacing window screens often need to happen because they tear or become loose. If done correctly, replacing a full screen can be done in half a day.

That said, window screens don’t always need to be fully replaced. Depending on the material of the screen and size of the tear, a patch may work just as well. Both fiberglass and aluminum can be patched if the hole is 3-inches or smaller. If you’re not sure about your screen’s material, simply bring it to a hardware store like Richmond Hardware to be sure you get the right patch kit.

4. Keep an Eye on Screen Tension

Screen tension is an important part of the replacement. If screen tension is too tight, it can bow in the aluminum sides of the frame; if it’s too loose, the screen will sag in the middle. An easy trick? After you roll in the screen on the first two sides, place a brick or heavy object in the center of the screen. This will give you just enough slack to avoid it pulling too tight or hanging too loose. Continue installing the material on the final two sides of the screen and remove the weight. It should be a perfect tension!

Contact the Experts at Richmond Hardware

If you need window screen repairs but don’t have the tools or the time to take care of it yourself, the professionals at Richmond hardware have you covered! Whether it’s a tear or even a broken pane of glass, our team can fix it for you in no time. Save yourself the stress of your window repair project – contact us at Richmond Hardware today!